思想领导
电容储能点焊机焊接不同焊件时，应掌握好峰值焊接电流，调整通电时间和焊接压力。 I
2023
08
28
电阻点焊机的基本原理是在接头处加压并加热熔接，因此它在发电机中起着非常重要的作用
2023
08
28
众所周知，电阻点焊机的电极属于消耗品，因为随着焊接接头数量的增加，电极尖端会逐渐形成
2023
08
28
电极间的距离及中间度应保证按压电极时有压力。 如果不能满足要求，必须进行调整
2023
08
28
Pressure in the spot welding process is an important factor in generating heat. Pressure is the mechanical force applied to the weld. By reducing the contact resistance through pre
2023
08
28
Without the advancement and improvement of technology, it is difficult for many products to complete some important steps. Resistance welding machine is one such product. Among the
2023
08
28
Each welding machine must be equipped with a separate special power switch, and it is strictly forbidden to use one power switch for several welding machines
2023
08
28
Pre-pressure time: It is the time required to press the set electrode into contact with the workpiece and stabilize the pressure. This time can be set, but if it is set too short,
2023
08
28
The main point of manufacturing the energy storage spot welder includes the control of electrical energy. As the name says, the device will convert the electrical energy stored in
2023
08
28
To use the spot welder well, the operator must strictly follow the actual operation in practice. Corrosion and oil should be eliminated from the surface of the workpiece, otherwise
2023
08
28
During the operation of the resistance spot welder, the surface of the work piece needs to be cleaned, as this reduces the defect rate of the welded joint and improves the welding
2023
08
28
The pressure device of the seam welder adopts a cylinder, which can evenly adjust the welding pressure and will not change the welding pressure due to the fluctuation of the pressu
2023
08
28
没有数据
Contact Us
留下您的询问，我们将为您提供优质的产品和服务！
Customer service