Thought Leadership
When the capacitor discharge spot welder welds different welded parts, the peak welding current should be handled and the energizing time and welding pressure should be adjusted. I
2023
08
28
The basic principle of resistance spot welder is to pressurize and heat fusion at the joint, so it plays a very important role in the power generator.
2023
08
28
It is well known that the electrodes of resistance spot welding machines are consumables, because as the number of welded joints increases, the electrode tip will gradually form a
2023
08
28
The distance between electrodes and the intermediate degree should ensure that there is pressure when the electrodes are pressed. If the requirements cannot be met, adjustments mus
2023
08
28
Pressure in the spot welding process is an important factor in generating heat. Pressure is the mechanical force applied to the weld. By reducing the contact resistance through pre
2023
08
28
Without the advancement and improvement of technology, it is difficult for many products to complete some important steps. Resistance welding machine is one such product. Among the
2023
08
28
Each welding machine must be equipped with a separate special power switch, and it is strictly forbidden to use one power switch for several welding machines.
2023
08
28
Pre-pressure time: It is the time required to press the set electrode into contact with the workpiece and stabilize the pressure. This time can be set, but if it is set too short,
2023
08
28
The main point of manufacturing the energy storage spot welder includes the control of electrical energy. As the name says, the device will convert the electrical energy stored in
2023
08
28
To use the spot welder well, the operator must strictly follow the actual operation in practice. Corrosion and oil should be eliminated from the surface of the workpiece, otherwise
2023
08
28
During the operation of the resistance spot welder, the surface of the work piece needs to be cleaned, as this reduces the defect rate of the welded joint and improves the welding
2023
08
28
The pressure device of the seam welder adopts a cylinder, which can evenly adjust the welding pressure and will not change the welding pressure due to the fluctuation of the pressu
2023
08
28
no data
CONTACT US
Contact Person: Christina Liu
Tel: 86 20 87813325 / 86 20 87819588 / 86 20 87815075
Fax: 86 20 87813346
Address: No.63 Xin Yi Road, Guangzhou, Guangdong China 510990
Contact Us
Leave your inquiry, we will provide you with quality products and services!
Customer service