Description
It is a kind of resistance welding process using MFDC inverter power supply. The power input is three-phase power frequency while the output is single-phase medium frequency. And the increase in frequency results in a significant reduction in the size of the welding transformer.
Application
It's widely used in the seam welding of many different materials, such as non-ferrous metals, high-temperature alloys, low carbon steel, stainless steel, high-strength steel, galvanized steel, aluminum alloy, etc.
Welding Samples
Specification
Model # | FB-200-L** | |
Rated Capacity | KVA | 200 |
Power Supply | V/Φ/Hz | 380/3/50 |
Max. Primary Current | A | 136 |
Primary Cable | MM2 | 50 |
Max. Short Circuit Current | KA | 35.3 |
Rated Duty Cycle | % | 10 |
Secondary Empty Voltage | V | 10 |
Welding Cylinder Size | Φ*L | Φ160*80 |
Max. Working Pressure | N | 10000 |
Compressed Air Pressure | MPa | 0.6~0.7 |
Cooling Water Consumption | L/MIN | 33 |
Compressed Air Consumption | L/time | 5.84 |
Throat Depth | MM | 1147 |
Arm Gap | MM | 115 |
Electrode Size | MM | Φ250*20 |
Dimensions | H(MM) | 2368 |
L(MM) | 2274 | |
W(MM) | 1263 |
Contact Person: Christina Liu
Tel: 86 20 87813325 / 86 20 87819588 / 86 20 87815075
Fax: 86 20 87813346
Address: No.63 Xin Yi Road, Taiping Town, Conghua District, Guangzhou China