Industry Knowledge
The welding machine must be properly grounded before use to ensure personal safety. Before using the welding machine, use a 500V megohmmeter to test the insulation resistance betwe
2023
08
28
1. For on-site use, there should be a rain-proof, moisture-proof and sun-proof hangar, and corresponding fire-fighting equipment should be installed. 2. Within 10m of the welding s
2023
08
28
How to use the spot welding machine: 1. When welding, the position of the electrode rod should be adjusted first, so that when the electrode is just pressed to the weldment, the el
2023
08
28
The process of spot welding is to open the cooling water; clean the surface of the weldment, after the assembly is accurate, send it between the upper and lower electrodes, and app
2023
08
28
Spot welding machines can be divided into universal (universal, special-purpose) spot welding machines according to their uses; According to the number of solder joints welded at t
2023
08
28
According to the use, the spot welding machine has a universal type (universal type) and a special type; according to the number of solder joints welded at the same time, there are
2023
08
28
Spot welding machine is a kind of mechanical equipment. It adopts the principle of double-sided double-point overcurrent welding. When working, two electrodes press the workpiece s
2023
08
28
1) Seam welding, like spot welding, is a welding process with combined thermal-mechanical (force) action. In comparison, its mechanical (force) effect is not sufficient in the weld
2023
08
28
working principle During the formation process of seam welded joints (intermittent) seam welding, each solder joint also goes through three stages of pre-pressing, electrified heat
2023
08
28
The seam welder is a resistance welder in which the workpiece is placed between the roller electrodes or between the roller electrode and the strip electrode, rolling continuously
2023
08
28
Seam welding machine refers to a resistance welding machine in which the weldment is assembled into an lap or butt joint and placed between two roller electrodes. The roller electr
2023
08
28
When using a butt welding machine to weld cables, pay attention to the following issues: 1. The power line connecting the welding machine to the power network should not exceed two
2023
08
28
no data
CONTACT US
Contact Person: Christina Liu
Tel: 86 20 87813325 / 86 20 87819588 / 86 20 87815075
Fax: 86 20 87813346
Address: No.63 Xin Yi Road, Guangzhou, Guangdong China 510990
Contact Us
Leave your inquiry, we will provide you with quality products and services!
Customer service