loading
CA H Series Heat and Cold Dual Use Chiller 1
CA H Series Heat and Cold Dual Use Chiller 1

CA H Series Heat and Cold Dual Use Chiller

The heat and cold dual chiller can switch between each other, speed up the production schedule, reduce energy consumption and improve production efficiency, which is widely used in sponge manufacturing, composite foaming, pharmaceutical and chemical industries.

 

Model: CA H Series Heat and Cold Dual Use 

MOQ: 1pcs

Price terms: FOB Guangzhou

Warranty: 1 year

After sale service: Free training service

Lead time: 

Industries: Sponge manufacturing, composite foaming, pharmaceutical and chemical industries. 

    oops...!

    no product data.

    Go to homepage

    Description

    CA H Series Heat and Cold Dual Use Chiller 2

    The CA H series heat and cold dual use chiller is introduced to meet the needs of some customers, with temperature control range 5°C to 250°C. This chiller unit is mainly divided into two systems: the heating system and the cooling system. The heat and cold dual chiller can switch between each other, speed up the production schedule, reduce energy consumption and improve production efficiency, which is widely used in sponge manufacturing, composite foaming, pharmaceutical and chemical industries.

    科姆森样册2021版-12副本 (2)

    Specification

    CA H Series Heat and Cold Dual Use Chiller 4

     CA-H Series Cold and Heat Dual-Use Chiller
    Mode CA-3H CA-5H CA-8H(D) CA-10H(D) CA-12H CA-15H
    Item
    Nominal cooling capacity Kcal/h 6803 11223 17630 22446 25585 35948
    50HZ/60HZ 8163 13468 21156 26935 30702 43138
    KW 7.91 13.05 20.5 26.1 39.75 41.8
    50HZ/60HZ 9.5 15.66 24.6 31.3 35.7 50.16
    Total input power KW 9.4 12.75 24.75 24.75 31.1 31.5
     Power supply voltage 3PH~380V/50HZ(60HZ)
    Refrigerant  Type R22(R134a/R407C)
    Control mode Capillary Expansion valve
    Compressor Type Hermetic scroll type(Piston)
     Power(KW) 2.81 4.1 3.31X2 4.1X2 9.82 12.4
    Condenser Type  High efficient finned copper tube+low noise outer rotor fan
    Cooling Air volume(m3/h) 3000 5000 8000 10000 12000 15000
    Evaporator Type Water tank with coil(Shell and Tube)
    Chilled fluid flow(m3/h) 1.36 2.24 3.52 4.47 5.12 7.2
    1.63 2.68 4.22 5.37 6.15 8.63
    Tank volume(L) 50 55 110 160 160 300
    Inlet/outlet pipe caliber 1" 1" 1" 1-1/2" 1-1/2" 2"
    Water pump Power(kw) 0.4 0.75 0.75 0.75 1.1 1.5
     Pump head(m) 20 20 20 20 20 20
    Heating device  Electrical heating pipe
    Power(kw) 9 12 24 24 30 30
    Safty protection Compressor overheating , over current, high and low pressure, over temperature , flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing.
    Dimension L(mm) 930 1140 1320 1530 1530 1850
    W(mm) 520 560 720 780 780 990
    H(mm) 1075 1140 1430 1540 1540 1680
    Weight Kg 135 165 290 340 350 550
    Note:
    1. Nominal cooling capacity calculated according to:Inlet/outlet chilled fluid temperature: 12℃/7℃. Inlet/outlet cooling air temperature: 30℃/40℃.
    2. Working condition: The temperature range circulating water is from 5℃ to 50℃. Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃. It is better to run the chiller while the ambient temperature at or below 35℃.
    Get in touch with us
    If you have any enquiry about quotation or cooperation, please use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
    Related products
    no data

    HERON, make welding simple

    CONTACT US

    Contact Person: Christina Liu
    Tel: 86 20 87813325 / 86 20 87819588 / 86 20 87815075

    Fax: 86 20 87813346

    Email: info@heronwelder.com

    Address: No.63 Xin Yi Road, Taiping Town, Conghua District, Guangzhou China

    HERON, make joining simple
    Copyright © 2024 HERON Intelligent Equipment Co., Ltd. - Heron-welder.com | Sitemap
    Customer service
    detect